Home ProductsWater Drilling Rig

Trailer Mounted Water Well Drilling Rigs / Truck Mounted Rotary Drilling Rig

Trailer Mounted Water Well Drilling Rigs / Truck Mounted Rotary Drilling Rig

  • Trailer Mounted Water Well Drilling Rigs / Truck Mounted Rotary Drilling Rig
Trailer Mounted Water Well Drilling Rigs / Truck Mounted Rotary Drilling Rig
Product Details:
Place of Origin: China
Brand Name: JINLUDI
Certification: CE
Model Number: SPJT300
Payment & Shipping Terms:
Minimum Order Quantity: 1 set
Price: negotiate
Packaging Details: nude
Delivery Time: 15-20 days
Payment Terms: T/T, L/C
Supply Ability: 2 sets per month
Contact Now
Detailed Product Description
Usage: Water Well Chassis: 8-tyre Trailer
Drilling Tech: Turnplate Rotary Power: 65kw Diesel
Mud Pump: 850L/min, 20mpa Drill Tower: 11.6m Height
Drill Rod: 6.5m Per Piece Hoist: 2 Sets
Max Drill Depth: 300m Hole Diameter: 450mm
High Light:

Trailer Mounted Water Well Drilling Rigs

,

850L/min Truck Mounted Rotary Drilling Rig

,

65kw diesel Water Drilling Rig

trailer chassis water drilling rig

 

SPJT300 Water Well Drilling Rig is installed on a trailer. This drilling rig can work through rotary mud circulation or DTH drilling technique. SPjT300 trailer chassis water well drilling rig is suitable for clay, sand, graveland pebble, and rock stratum. We add special device to add & reduce pressure during drilling which can enhance efficiency a lot. High hydraulic leg and hydraulic tower are chosen to save labor and keep safety during working.The common rotary drilling rig, namely the rotary drilling rig with positive circulation mud flushing, consists of a tower, a winch, a rotary table, a drilling tool, a mud pump, a faucet, a motor, etc. During operation, the power machine drives the rotary table through the transmission device, and the driving drill rod drives the drill bit to rotate the broken rock layer at a rotation speed of 30 to 90 revolutions per minute. The mud is pumped and pressurized by the mud pump and then is pressed into the hollow drill rod through the faucet above the drill rod, flows downward into the drill bit, and is ejected from the nozzle to cool and lubricate the drill bit; Debris from the bottom of the well is taken out of the wellhead through an annular channel outside the drill pipe. after settling in the settling tank, mud flows back to the mud tank for recycling. Some rotary drilling rigs are equipped with mud pumps and air compressors at the same time.

 

MAIN PATAMETER

 

drilling hole diameter

500mm

 

drill tower rated load

180KN
 depth 300m

 

drill tower height

 

11.6m(SPJT300)

 

turnplate max. torque

8.0KN/m dimension 12m×2.47m×3.4m
speed clockwise(reverse)44,77,139rpm power 80hp

turnplate diameter

450mm  transportation status

 

in bulk/trailer

lifting capacity of single rope of main hoist

30KN

weight of main rig

13.5t(SPJT300)

lifting capacity of single rope of secondary hoist

20KN

 

weight of drill rod, pipe &bit

6.6t
Mud pump BW850/20 (20Mpa pressure/850L/min)

 

Configure of one set of spjt300

no  code  name quantity remark
A main rig   1 group  
1 1C-0  turnplate 1group  
2 2-0 hoist 1group

 

Advanced gearbox and clutch

3 3B-0 transmission 1group Model 4135Na
4 FT0-0 drill tower 1set  
5 BW850/20  mud pump 1set  including all tools and hose
6    accessories 1 set (steel wire 80m plus 120m, protecting-cover etc.)
B  tools      
1 FG1-0 water tap 1 piece  
2 FG2-0 block group 1piece  
3 FG3B-0/8000 kelly rod 1piece L=7650mm
4 FG5-0  lifter 1piece  
5 FG7-4 joint 1piece  
6 FG8-0  fork 1piece  
7 FG9A-0 fork 1piece  
8 2-6A-0 shaft 1piece  
9 21/2" hose 1piece  
10 FG12-4/6500/R780 drill rod 89*10*6500mm 43 pieces Material:R780
11 FG7-1/2  joint 43pairs  

Trailer Mounted Water Well Drilling Rigs / Truck Mounted Rotary Drilling Rig 0

Contact Details
Shandong Geological & Mineral Equipment Ltd. Corp.

Contact Person: Lotus

Tel: +8615589918697

Send your inquiry directly to us (0 / 3000)